Full-house renovation led by Start2Finish Contracting at Brady’s mini mansion in Alexandria — all floors, paint, devices, plates, fixtures, and dimmers now brought to a clean, finished state.
Start2Finish is the full-house contractor — from demo to finish — not patch work.
| Item | Completed |
|---|---|
| Single-gang wall plates | 16 installed (final finish count) |
| 4-gang plates | 1 installed |
| 3-gang plates | 1 installed |
| Standard dome fixtures swapped | 5 total (kitchen, laundry, baths, master closet) |
| Existing cans → canless recessed | 4 cans in master area converted to canless |
| Dimmer switches installed | 3 (living lane, hall lane, master lane) |
House is now ready for lender photos, appraisal visits, and Start2Finish portfolio use — no loose ends in the electrical finish scope.
Electric will kill you if you rush. This job was brought to completion with controlled, consistent work — clean terminations, straight plates, level fixtures, and documented counts.
Final state by area — written so you can drop this into a lender packet or Start2Finish one-pager without edits.
| Area | Electrical Work | Status |
|---|---|---|
| Master Bedroom | Devices swapped to new spec, ceiling fan installed and running, plates installed, and dimmer set for the master lane. Room reads as fully finished and lender-ready. | Done |
| Bedroom 2 | Sockets and switches previously completed; now fully finished with matching plates and clean screw lines. Ready for photos and future staging. | Done |
| Living Room | All outlets changed, 4-gang switch bank completed, final plate installed, and dimmer set for the living room lane. Living room lighting now has smooth control and a clean wall presentation. | Done |
| Kitchen | Plugs and switch banks updated, kitchen dome light swapped, and plates installed. GFCI / sink-side locations verified and tightened during final tester pass. | Done |
| Laundry / Washroom | Devices changed, laundry light swapped, and plates installed. Tester pass completed so outlets read clean before machines move back in. | Done |
| Half Bath (by Kitchen) | Light switch and plug previously upgraded, hall light by half bath changed, and plates installed. Wet area now reads as finished from door to mirror. | Done |
| Full Bathrooms | Both full baths now have upgraded lights and matching plates. Master bathroom domes replaced, cans converted to canless per Brady’s request, with dimmer control tied into the master lane. | Done |
| Master Closet | Dome fixture swapped and plates installed. Closet reads bright and even when doors open — no unfinished devices. | Done |
| Hallways | Multiple 3-ways and standard switches upgraded, hall light near half bath swapped, and dimmer added in the selected hall location. Plates installed with screws lined one direction. | Done |
Exact circuit / room codes (LR, KIT, HALL, MBR) can be mirrored on the Start2Finish box map and pull-map pages when you need full panel labeling.
Completion notes for your records and any bank / lender documentation.
This log is written in completion language so you can clip it straight into Start2Finish files, emails, or one-pagers without changes.
Checklist for photos and clips that show Start2Finish quality.
Wide shot or clip showing fresh white brick and entry.
4-gang plus dimmer, finished plates, and room lit.
New fixtures and plates — one wide shot each.
Show upgraded fixtures, canless lights, and clean plates around wet areas.
Tight shot of wall plates with screws perfectly aligned.
Brady on-site shot or clip — “Start2Finish — we do work that lasts.”
Suggested filename format:
BRADY-LR-4GANG_AFTER_20251206.jpg ·
BRADY-KITCHEN-LIGHT_AFTER_20251206.jpg
Last updated: 2025-12-06 Context: Electrical finish scope completed at Brady’s Alexandria house — Start2Finish file can be marked as finished and moved into lender / portfolio lane.